FAA: Don’t Fly Non-RVSM Aircraft in RVSM Airspace

AINalerts » February 2, 2012
February 2, 2012, 3:20 PM

A surge in pilots requesting RVSM flight levels or operating in RVSM airspace (FL290 to FL410) without the required authorization prompted the FAA to issue Information for Operators (InFO) 12001, which emphasizes flight-planning responsibilities when conducting these operations.

“In the first 15 days of November, 35 IFR operations were filed incorrectly,” the FAA said in the document. “These events indicate that not only are ‘non-RVSM’ aircraft being filed as RVSM authorized, but also, authorized aircraft [are] unable to conduct RVSM due to equipment malfunctions.”

The FAA is reminding operators that aircraft must be properly equipped to fly at RVSM altitudes, and that information submitted on FAA and ICAO flight plans must be accurate, complete and consistent. “If either the operator or the aircraft or both has not received RVSM authorization (non-RVSM aircraft) the pilot will neither request nor accept a clearance into RVSM airspace,” the FAA emphasized.

RVSM requirements and guidance can be found in FAR 91.180, Aeronautical Information Manual Section 4-6-10 and Advisory Circular 91-85.

FILED UNDER: 
Share this...

Comments

No Avatar
George Kinywa
on July 28, 2013 - 6:51am

What will be the scenario is non RVSM aircraft is allowed to operate at the said levels,,examples of accidents or incidents,i just heard a pilot being denied start since the flight plan is incorrect

Please Register

In order to leave comments you will now need to be a registered user. This change in policy is to protect our site from an increased number of spam comments. Additionally, in the near future you will be able to better manage your AIN subscriptions via this registration system. If you already have an account, click here to log in. Otherwise, click here to register.

 
X