Aerospace engineering

May 7, 2008 - 7:22am

Aviation Partners now expects to receive certification of its winglets for the Hawker 800 next May, nearly a year later than originally planned. Failure to obtain certain engineering data from Raytheon Aircraft caused the delay, according to Aviation Partners. The Seattle company claims winglets allow the “Hawker 800SP” to fly 30 min longer or 180 nm further and 18 kt faster than a standard Hawker 800.

May 7, 2008 - 5:58am

A fixture at Van Nuys (Calif.) Airport (VNY) for decades, Clay Lacy Aviation now has a second location. Together with Joe Clark, CEO of Seattle-based winglet pioneer Aviation Partners (though that company is not involved in the deal), Lacy has acquired the former Flight Center at Seattle Boeing Field (BFI) and renamed it the Clay Lacy Flight Center. Terms were not disclosed.

May 6, 2008 - 12:21pm

FOKKER F28-100, Manchester, UK, APRIL 6, 2002–A misunderstanding of the flight manual resulted in damage to the horizontal stabilizer tip and leading edge of a Fokker F28 Mark 0100 (G-UKFI) at Manchester Airport. There were no injuries to those aboard, including the ATP-rated captain and his copilot.

May 6, 2008 - 12:03pm

ENSTROM F-28C, NEAR MEDICINE BOW, WYO., JUNE 10, 2002–N5694Z, operated by Falcon Helicopter and piloted by a commercial-rated pilot, was substantially damaged during a hard landing at 9:45 a.m. near Medicine Bow. The pilot sustained serious injuries, and the passenger received only minor injuries. The weather was reported to be VMC for the flight, which originated in Laramie, Wyo., at 7:30 a.m.

May 6, 2008 - 11:35am

Piper is working on boosting the max takeoff weight for its Meridian turboprop single to create a 15-percent increase in useful load. By the end of the year, Piper said it will receive certification of aerodynamic and structural changes to its Meridian that will allow a 242-lb increase in mtow from 4,850 lb to 5,092 lb.

May 6, 2008 - 9:47am

Early next year Boeing will offer a kit for BBJs and BBJ2s that will provide a 6,500-ft cabin at FL 410 instead of the standard 8,000-ft cabin. The kit, which can be installed on green and in-service BBJs, is expected to cost less than $100,000. Components include new cabin-pressure-controller boxes with revised software, a new cabin-altitude indicator and two pressure-relief valves.

May 5, 2008 - 11:01am

Economical, practical, environmentally friendly supersonic flight is the next big thing in commercial aviation. Or is it? From where aeronautical technology stands today, practical supersonic flight (and by “practical,” we do not mean the Anglo-French Concorde, which generates noise and atmospheric pollution levels that preclude all but the smallest volumes of operation) is far off.

April 29, 2008 - 10:09am

AINtv’s David Lombardo talks with Dassault Falcon Jet president and CEO John Rosanvallon about the future of Dassault and the Falcon 7X. Click here to view.

April 29, 2008 - 6:17am

Aero Toy Store has been appointed the factory authorized representative of Aerion for the sale of the company’s supersonic business jet. The agreement allows the initial sale of 12 of the new jets, which will cruise at speeds up to Mach 1.6 at altitudes of up to 51,000 feet. It has a range of 4,000 nm.

April 28, 2008 - 9:29am

In December, delivery delays of Dassault’s new Falcon 7X trijet were “in some cases” as long as six months. Since then, the manufacturer has temporarily moved cabin completion work for early NetJets Europe Falcon 7Xs to its manufacturing assembly plant in Merignac, France. The main completion center in Little Rock, Ark., has begun using subcontractors to assist in handling cabinet manufacturing and some assembly work.

 
X