Dassault Falcon Jet broke ground this week on an expansion and upgrade of its Little Rock, Ark. completion facility to accommodate the French airframer’s recently launched Falcon 5X and 8X. A 250,000-sq-ft hangar is part of the $60 million project, which adds production and completion space to the existing one million sq ft at the campus. Older hangars and the cabinet, upholstery and headliner shops will undergo a refurbishment.
FAA airworthiness directive AD 2014-16-21, effective October 2, will require operators of Dassault Falcon 7X trijets to replace certain pintle pins in the left- and right-hand main landing gear. The agency found that some pintle pins in the Messier-Bugatti-Dowty landing gear had been incorrectly corrosion-protected, which could cause them to shear under normal load and lead to collapse during takeoff or landing.
Dassault Falcon Jet is investing in a major expansion of its Sorocaba maintenance facility over the next few months “to better accommodate the demands of Brazilian and other South American customers.” The expansion of the Dassault Aircraft Services-Sorocaba facility will add 10,000 sq ft (929 sq m) of hangar space, significantly boosting the existing 23,000-sq-ft (2,137-sq-m) building and “reinforcing our ability to serve the anticipated demand,” said John Rosanvallon, president and CEO of Dassault Falcon Jet.
Aviation Partners, Inc. (API) will this week start installing the first set of its high-Mach blended winglets on a Brazilian-registered Dassault Falcon 50. An existing U.S. FAA supplemental type certificate has been approved by Brazil’s ANAC agency. The U.S. company received FAA approval for the modification earlier this year.
Dassault Aviation received orders for 38 Falcons in the first half of this year while delivering 25, CEO Eric Trappier announced on Friday in Paris. The orders were worth €1.6 billion ($2.2 billion), a 29-percent increase over the same period in 2013 and a continuous improvement since the first half of 2011.
Rockwell Collins received EASA certification of its Pro Line 4 to Pro Line 21 avionics retrofit for the Falcon 2000 and Falcon 2000EX. The Pro Line 21 retrofit features four 10- by 8-inch LCD panels and Waas/Egnos capability, as well as support for electronic charts and graphical weather. The upgrade is also available for the Falcon 50EX. The first installation is scheduled for this summer at a Ruag maintenance facility in Germany. An upgrade for Fans-1/A will be available next year for these Falcons.
Ruag Aviation and Lausanne-based design house Yasava Solutions have joined forces to deliver an innovative design concept known as Astral. Intended for large-cabin business aircraft such as the Dassault Falcon 7X, Bombardier Globals and Embraer Lineage, Astral is currently being applied to a Global 6000. The cabin design, with an accent on 21st century luxury, is being showcased at EBACE at the Yasava exhibit (Booth 3439).
Geneva-based Global Jet reports receiving several business jets for charter recently as well as it gaining a Chinese air operator certificate (AOC) from the China Civil Aviation Administration (CAAC). The AOC allows operations in China by Global Jet in partnership with Hangzhou-based Jinggong Business Aircraft. Global Jet is exhibiting here at EBACE 2014 in Booth 5555.
A Dassault Falcon 7X earlier this month set a speed record from New York Teterboro airport to London City (LCY) airport, cruising at Mach 0.88 for most of the 3,465-nm trip.
Following the launch of its aviation business in Turkey, Amac Aerospace announced that Dassault has appointed its facility at Ataturk International Airport, Istanbul, an authorized service center (ASC). Amac Aerospace Turkey achieved EASA Part 145 approval earlier this year to carry out line maintenance (including 4A+) on the Falcon 900 and 900EX/DX/LX EASy.
The company expects similar approvals for the Falcon 2000 and 2000EX EASy later in the summer, with Falcon 7X approval to follow by year-end.
- Page 1