GE Honda HF120

May 21, 2013 - 2:03pm

GE Honda Aero Engines has announced that its 2,095-pound-thrust HF120 turbofan intended initially for the HondaJet is nearing completion of certification tests and is on track for delivery of the first entry into service engines before year-end. “We now have a line-of-sight for certification and we are gaining experience on the fleet,” said GE Honda Aero president Terry Sharp.

December 4, 2012 - 4:45am

Honda Starts Production of HondaJet

October 29, 2012 - 6:30pm
Honda Aircraft president Michimasa Fujino

Honda Aircraft has started the production line for its $4.5 million HondaJet entry-level twinjet. A handful of initial customer aircraft are scheduled to be completed next year. Honda expects FAA certification of the HondaJet’s GE Honda HF120 engine (2,095 pounds of thrust/5,000-hour TBO) in the middle of next year and aircraft certification in 2013.

October 29, 2012 - 10:45am
GE Honda HF120

GE Honda Aero completed water-ingestion testing on the HF120 engine that powers Honda Aircraft’s HondaJet in early September. The tests were done in one of GE’s Peebles, Ohio test cells and are just one of many the HF 120 has passed during a busy year as the engine nears FAA certification.

October 16, 2012 - 4:01pm

GE Honda Aero Engines completed water-ingestion testing last week on the HF120 engine that powers Honda Aircraft’s HondaJet. The tests were done in one of GE’s Peebles, Ohio test cells.

“2012 has been an extremely productive year,” said GE Honda Aero president Terry Sharp. The HF120 passed the ice slab test in August 2011 after failing it in February 2011, due to fan blade tip deformation causing a reduction in required thrust, according to executive v-p Masahiko Izumi. “We decided to make a small design change” to the fan blade tips, he said.

May 17, 2012 - 1:59pm
Honda Aircraft president and CEO Michimasa Fujino

The HondaJet fuselage displayed this week at EBACE was a production article with the production interior and cockpit. Some changes are evident in the fuselage, notably the removal of flip-down displays above each passenger seat.

May 13, 2012 - 5:15pm

GE Aviation (Stand 1143) is here promoting its 800-hp H80 turboprop engine, which was certificated by the U.S. Federal Aviation Adminstration in March and already has several applications. Meanwhile, the HF120 turbofan program–for the HondaJet–has progressed slowly.

February 6, 2012 - 12:10am
HondaJet F2

Honda Aircraft’s third FAA design-conforming flight test prototype–F2–made its first flight on Nov. 18, 2011, from Honda Aircraft headquarters at Piedmont Triad International Airport in Greensboro, N.C. Stephan Johansson captained the flight, along with copilot Tom Maurer. The 44-minute first test flight reached 12,480 feet and 245 ktas and included flap and landing-gear operation and handling tests at low speed and up to 200 ktas as well as air data systems checks and an ILS approach using the flight director in the HondaJet’s Garmin G3000 avionics suite.

October 10, 2011 - 9:37pm
HonaJet

Deliveries of the HondaJet will be delayed until at least mid-2013 because of a late-stage redesign of the GE Honda Aero HF120 engine that powers it. The engine fan has undergone the redesign following a failure during an on-ground ice ingestion test, Honda Aircraft president Michimasa Fujino revealed at NBAA 2011 in Las Vegas today. Fujino said he expected the revamped engine to be certified sometime in the second half of 2012. He called the delay “regrettable.”

October 10, 2011 - 2:25am

Nexcelle (GE Aviation, Booth No. 1833) is developing the nacelles for two new engines from GE Aviation and CFM International, a partnership between GE and Safran for business and commercial aircraft: the GE Passport 20 and the CFM International Leap-X1C.

 
X