Honda Aircraft has started the production line for its $4.5 million HondaJet entry-level twinjet. A handful of initial customer aircraft are scheduled to be completed next year. Honda expects FAA certification of the HondaJet’s GE Honda HF120 engine (2,095 pounds of thrust/5,000-hour TBO) in the middle of next year and aircraft certification in 2013.
GE Honda Aero completed water-ingestion testing on the HF120 engine that powers Honda Aircraft’s HondaJet in early September. The tests were done in one of GE’s Peebles, Ohio test cells and are just one of many the HF 120 has passed during a busy year as the engine nears FAA certification.
GE Honda Aero Engines completed water-ingestion testing last week on the HF120 engine that powers Honda Aircraft’s HondaJet. The tests were done in one of GE’s Peebles, Ohio test cells.
“2012 has been an extremely productive year,” said GE Honda Aero president Terry Sharp. The HF120 passed the ice slab test in August 2011 after failing it in February 2011, due to fan blade tip deformation causing a reduction in required thrust, according to executive v-p Masahiko Izumi. “We decided to make a small design change” to the fan blade tips, he said.
Honda Aircraft has broken ground for a 90,000-sq-ft maintenance facility at its world headquarters on Piedmont Triad International Airport. The Greensboro, N.C. facility is scheduled to enter service by the second half of next year.
Site preparation for the $20 million MRO facility began last February on a 54-acre extension to the company’s world headquarters, which houses the manufacturer’s R&D and production buildings. Overall, the $120 million investment encompasses more than half a million square feet on more than 130 acres.
The HondaJet fuselage displayed this week at EBACE was a production article with the production interior and cockpit. Some changes are evident in the fuselage, notably the removal of flip-down displays above each passenger seat.
GE Aviation (Stand 1143) is here promoting its 800-hp H80 turboprop engine, which was certificated by the U.S. Federal Aviation Adminstration in March and already has several applications. Meanwhile, the HF120 turbofan program–for the HondaJet–has progressed slowly.
Michimasa Fujino, president and CEO of Honda Aircraft Co., announced recent certification milestones for the company’s HondaJet yesterday at EBACE, while unveiling new enhancements for the VLJ’s avionics and cabin management system (CMS).
Honda Aircraft president and CEO Michimasa Fujino announced recent certification milestones for the company’s HondaJet today at EBACE, while unveiling new enhancements for the light jet’s avionics and cabin management system (CMS).
GippsAero appointed Tallahassee, Fla.-based Flightline Group as its authorized dealer for the Southeast U.S. last Thursday. The Australian-based manufacturer, which is owned by Mahindra Aerospace of Mumbai, India, currently produces the GA8 Airvan utility aircraft and it is developing the 10-seat GA10 turboprop single. Flightline Group is also the authorized dealer for Piper in the Southeast and for Honda Aircraft in the Southeast and Northeast.
Honda Aircraft’s third FAA design-conforming flight test prototype–F2–made its first flight on Nov. 18, 2011, from Honda Aircraft headquarters at Piedmont Triad International Airport in Greensboro, N.C. Stephan Johansson captained the flight, along with copilot Tom Maurer. The 44-minute first test flight reached 12,480 feet and 245 ktas and included flap and landing-gear operation and handling tests at low speed and up to 200 ktas as well as air data systems checks and an ILS approach using the flight director in the HondaJet’s Garmin G3000 avionics suite.