Dallas Aeronautical Services (DAS) is in the final stages of receiving approval to open a center for the maintenance, repair and overhaul of composite and bonded metal/composite components for a wide range of business aircraft types. The center will be the first of its kind in South America.
Rolls-Royce on Wednesday revealed plans for a new generation of engine designs to replace the current Trent family. The first, called Advance, would reach the market by the end of this decade, burning at least 20 percent less fuel and emitting 20 percent less CO2 than the first generation of Trent engine. The second, dubbed UltraFan, would enter service by 2025 and use a geared design and a variable-pitch fan system capable of delivering at least a 25-percent improvement in fuel burn and emissions.
Cenco (Safran) will build a 46-foot engine test cell in Jeddah, Saudi Arabia, for Saudia Aerospace Engineering Industries (SAEI). The new facility will allow SAEI to test the GE90-94/115, CFM56-5B/7B, CF34-8E/10E, CF6-80C2D1F/B5F and V2500-D5 while providing for future engine programs such as the Rolls-Royce Trent 700/900/1000 and the GE Aviation GEnx-1B/2B. The facility is set to enter service in July 2016.
International Aero Engines has launched its new Pure-V designation for V2500 engines maintained to IAE’s build standards, the company announced here in Dubai. A Pure-V-designated engine contains IAE-approved parts and repairs throughout the entire engine.
Intertrade, a Rockwell Collins company that supplies recertified used aircraft parts, expanded its product offerings to include engine parts. Intertrade’s primary market focus is material for the CFM56-5B, CFM56-7B, V2500-A5 and PW4000, among other next-generation engines. The company offers customers a variety of support options, including consignment and outright sale. Intertrade’s new engine division will be located in Boca Raton, Fla. The company has appointed Jeff Plas, an engine expert and industry veteran, to lead the business.
The NTSB is investigating the October 15 failure of an International Aero Engines V2500 engine aboard a Spirit Airlines Airbus A319 20 minutes after takeoff en route from Dallas to Atlanta. An initial investigation of the A319 determined the failure was contained within the engine’s outer casing. The aircraft landed safely.
Aero engines continue to represent “a robust investment opportunity” for those trading in the market for leased spares, according to the International Bureau of Aviation (IBA). However, the UK-based consultancy’s 2013 Engines Value Book, published last week, shows significant variations in engine values and shifts in demand for leased powerplants.
International Aero Engines (IAE) will begin building the first engine for the Brazilian KC-390 multirole tanker/transport aircraft the week following the Paris Air Show.
The event kicks off the action for an engine program that is celebrating its 30th birthday this year. For the Airbus A320 series application, the IAE V2500 is heading for its highest annual production run ever, with delivery of more than 500 engines planned this year and next.
Airbus’s choice of the Pratt & Whitney Geared Turbofan on the A320neo and Rolls-Royce’s subsequent divesture in engine joint-venture IAE might have signaled to some the beginning of the end of the V2500 turbofan.
A recent Boeing study predicted a demand for up to 23,000 single-aisle airliners over the next 20 years. For the three engine manufacturers involved in the seven single-aisle aircraft currently in development, the business case for developing all-new engines to power them has been more than justified.
- Page 1