According to the NTSB’s factual report of the March 16 ground collision at the Signature Flight Support ramp at Newark Liberty International Airport, a Boeing Business Jet started to taxi without ground assistance and then hit a GIV preparing to taxi with ground assistance. The Safety Board reported that, “according to an FAA inspector, ground personnel were in place to assist the Gulfstream for its taxi out of the ramp area.
Ibis Aerospace flew its second production Ae270 Propjet fitted with the Pratt & Whitney Canada PT6-66A in late February from Aero Vodochody’s flight-test facilities near Prague, Czech Republic.
Boundary Layer Research, the Everett, Wash. company that developed winglets for the Beech Duke some 10 years ago, is now designing winglets for King Air 200s and 300s. A prototype has been flying since late last summer. An announcement sent in December to King Air operators to gauge their interest in such a modification garnered an “overwhelming” response, claimed company president Bob Desroche.
Aviation Partners is hoping to complete the STC program for a winglets retrofit on Hawker 800s and begin initial deliveries of modified aircraft before the end of this month. The Hawker 800SP project has been in the works for more than two years. Failure to obtain certain OEM data and changes in FAA certification methods lengthened the STC process.
Cessna announced today that it is partnering with Winglet Technology of Wichita to offer the company’s patented elliptical winglets as a retrofit later this year for in-service Citation Xs. Though flight testing won’t begin until later this summer, Winglet Technology president Bob Kiser told AIN the design has been shown to “significantly improve performance” on hot days at higher elevations.
Changes to the Dassault Falcon 7X, now in flight test, could increase its range to as much as 6,000 nm at Mach 0.80, Dassault Aviation said today. The current guaranteed range of the 7X is 5,700 nm, but Dassault is currently evaluating several range-boosting enhancements, including Dassault-designed winglets.
Beginning next January, Raytheon is scheduled to start delivering the winglet-equipped Hawker 850XP, successor to the Hawker 800XPi. Besides what Raytheon Aircraft calls "ramp appeal" the three-foot high winglets will, according to the company, improve airspeed and climb, as well as increase range by 4 percent, or 100 nm.
Boundary Layer Research, the Everett, Wash. company that developed winglets for the Beech Duke 10 years ago, is now designing winglets for King Air 200s and 300s. A prototype has been flying since late last summer and an announcement to King Air operators in December garnered an “overwhelming” response, claimed company president Bob Desroche. He said winglets will improve speed, handling and fuel economy.
Even though noise wasn’t a factor in the accident, February’s Challenger overrun at Teterboro has inevitably resurrected local residents’ complaints about aircraft noise. It doesn’t take much, as we all know, to reinvigorate the anti-noise folks.
Three months after receiving certification for its winglets on the Hawker 800, Aviation Partners has received FAA approval for installing winglets on the Hawker 800XP.