Boeing 737

February 11, 2014 - 1:55am
Taxibot plans to have its almost-autonomous tug in service this year.

Three companies are competing to offer airlines a fuel-saving way to have their aircraft taxi with engines shut down.

February 10, 2014 - 10:10pm
Crane’s landing gear control interface unit is being retrofitted to the A320s of United Airlines and British Airways.

Crane Aerospace and Electronics has announced that its SmartStem wireless tire pressure system has been certified for use with Boeing 737NG aircraft. It is already approved for use with the Boeing 747-400, 777 and 787, and with numerous business jet types. The system comprises high-accuracy sensors that replace standard wheel fill stems, and a handheld reader that takes quick and accurate tire pressure readouts without gas loss. The ease and speed of use of the system promotes daily checks, with improved safety as a result, and an increase in tire life.

February 9, 2014 - 6:50pm
Leap-1A, destined to power the Airbus A320neo, began running on GE’s Peebles, Ohio testbed last September. Next in line is the Leap-1B, which will power the Boeing 737.

Engine manufacturer CFM International (Stand G23) plans to test 15 Leap engines this year as part of a development program leading to certification of the Leap-1A for the Airbus A320neo next year. Also part of the program, the Leap 1B and -1C versions are to power the upgraded Boeing 737 Max and the new Comac C919 narrowbodies, respectively. The engine’s designers promise a 15-percent fuel burn advantage over the current CFM56.

January 22, 2014 - 2:20pm

Bahrain International Airport will be home to Mena Tempus, a new joint venture between Mena Aerospace Enterprises and Tempus Jet Centers (Tempus Jets). The new venture will focus on delivering aviation services to the Middle East.

January 8, 2014 - 2:30pm

Norwich-based KLM UK Engineering has opened a facility dedicated to dismantling and recycling aircraft. The center is one of only a few in Europe.

The MRO is already licensed to service aircraft from the day they enter service, and this new dismantling operation positions the MRO to offer “cradle-to-grave” service over an aircraft’s potential life of 20 years or 18 million air miles.

The company works mostly with Boeing 737s, Airbus A320s and BAe 146/Avro RJs.

January 8, 2014 - 2:00pm

Associated Air Center (AAC) has been awarded the interior completion contract for a green Boeing 787-8 BBJ. The aircraft interior is already under full design review. AAC has also kicked off detailed planning, staffing and training in anticipation of delivery of the green aircraft from Boeing in the middle of this year. The aircraft offers 2,404 sq ft of cabin floor area and a range of 9,590 nm; the larger 787-9 BBJ offers 2,762 sq ft of cabin space and a range of 9,950 nm.

December 16, 2013 - 2:34pm

The captain who lost control of a Boeing 737 that subsequently crashed in Kazan, Russia, on November 17 may have been operating with a false pilot certificate, according to Associated Press reports on the investigation. The aircraft was executing a go-around when it entered a near-vertical dive before the impact that killed all 50 people on board.

December 9, 2013 - 11:40am

Following delivery last week of the first 787-9 rudder built in China by Chengdu Civil Aviation (CCAC), Boeing extended its supply chain further for yet another airfoil subassembly, choosing the UK’s GKN Aerospace to build the winglet for the 737 Max. GKN joins Korean Air Aerospace Division (KAL-ASD) in South Korea as co-supplier of the raked, dual-feather-design winglet.

November 19, 2013 - 5:48am

Crane Aerospace & Electronics announced the approval of its SmartStem wireless tire pressure checking system on the Boeing 737NG. Crane said that its patented technology offers a way to check tire pressure quickly, accurately and without gas loss. The system consists of sensors and a handheld reader. The sensors replace the existing standard wheel fill stems and the reader electronically reads and stores tire pressure and temperature.

November 18, 2013 - 11:12am
CFM engine order

Engine manufacturers reaped the rewards of the airline order bonanza at this year’s Dubai Airshow, led by GE Aviation (Pavilion A9), which logged $26 billion in engine orders and service agreements from Emirates, Qatar Airways and Etihad Airways.

Collectively, the three Gulf carriers placed orders for 450 new GE9X engines now under development for the new Boeing 777X widebody. GE also received orders for Boeing 787 GEnx engines and 777 GE90 engines.

 
X