Chad is the editor of AINalerts, AIN's daily business aviation newsletter, and is also the news editor at AIN Media Group.&nbsp;He has been writing about aviation, with an emphasis on business aviation, since 1994. Chad started his writing career at The Avion,&nbsp;the&nbsp;student newspaper at Embry-Riddle Aeronautical University in Daytona Beach, Florida, serving as editor-in-chief before graduating with a bachelor's in aeronautical science. After a stint as managing editor at Professional Pilot&nbsp;magazine, he joined&nbsp;AIN in late 1998. Chad holds a commercial pilot certificated with instrument and multi-engine ratings, and he also is a CFI/CFII. He lives and works from his home in Venice, Florida.

Online Editor

Chad Trautvetter

Embraer Executive Jets officially opened its expanded assembly facility in Melbourne, Fla., today, adding Legacy 450 and 500 production to the existing Phenom 100 and 300 line. Florida Gov. Rick Scott, U.S. Senator Bill Nelson (D-Fla.) and other elected officials joined company president and CEO Marco Tulio Pellegrini and Gary Spulak, Embraer’s president of its North American division, in cutting the ceremonial ribbon.

 


The expansion, started in October 2014, more than doubles the size of the facility, to 149,000 sq ft/124,600 sq m, allowing the Legacy 450/500 and Phenom 100/300 lines to be side-by-side under one roof. On May 13, the Phenom line was moved into its new position, which is 90 degrees to the previous production flow, while the first Legacy 450 started rolling down the line on May 16.

 


An adjoining 31,000-sq-ft/25,920-sq-m completion center/flight-prep building—which, unlike the previous flight-prep area, has a fire-suppression system to accommodate fueled aircraft—is complete, but won’t open until June 17, after apron paving is finished. A separate two-bay paint facility and two-bay delivery center for the Legacy midsize jets will open in October and December, respectively, Embraer Executive Jets managing director and COO Phil Krull told AIN.

 


According to Krull, Legacy assembly will start out slow in Melbourne; the first Legacy 450 now on the line won’t be delivered until mid-December. Two Legacy 450s will first be assembled at the facility, followed by two 500s. After that, this mix will be determined by customer demand, he said. The facility will be able to assemble up to 96 Phenoms and 72 Legacys annually. However, the facility will deliver just one Legacy 450 this year, with four expected to come off the line at Melbourne next year, Krull said, with ramp-up expected to increase in 2018.

 


All Phenom assembly will be shifted to the Florida site as of July 1, he noted. An Embraer spokesman told AIN that the last Phenom&nbsp;to be produced in Brazil—a Model 300—will be delivered next month. Phenom 100 and 300 assembly in Melbourne—currently coming off the line at a rate of five per month—will increase to six a month by year-end, according to Krull. This is expected to rise to seven per month sometime next year—the maximum capacity with two shifts.

 


Up to 600 new employees will be added at the U.S. facility for Legacy production, with 50 of these positions planned to be filled by year-end.

News and developments about airplanes, helicopters and unmanned air vehicles used in all varieties of operations, including airlines, military, business, commercial, general aviation and private.

Embraer Starts Legacy 450/500 Production in U.S.

Up to 600 new employees will be added at the U.S. facility for Legacy production.

2024 Corporate Aviation Leadership Summit

Sarah Rose

News and issues relating to business, corporate and private aviation, primarily regarding turbine-engine-powered airplanes and helicopters. Subjects include aircraft, engines, maintenance, operations, personnel, acquisitions, accidents, safety, security, and training.

Lineup includes 750S Coupe and Artura Spider

NBAA-BACE To Feature Supercar Lineup from McLaren

Hanneke Weitering

Eviation's CEO offers insights into the slow-moving stealth program's progress

Eviation Quietly Prepares to Build Updated Alice Prototype

Kerry Lynch

Global operations were off in the most recent week, expanding on the year-long trend

WingX: Combined Headwinds Drag Down Bizjet Operations

News and issues relating to international air transport and cargo carriers, national airlines and regional airlines, including aircraft, engines, personnel, acquisitions, accidents, safety, security and training.

The demonstrator completed its fifth test flight with plans to fly supersonic this year

Boom XB-1 Progressing Toward Supersonic Flight

Charles Alcock

News about environmental issues relating to aircraft operations, including noise issues, emissisions, and regulations. See Fuel for biofuel.

Remotely piloted flights will start in 2025 as manufacturer works towards service entry in the 2030s

Textron Will Flight Test Nexus eVTOL Aircraft at Salina 

News and developments about aircraft engines, including turbofan, turboprop, turboshaft and piston.

News and developments about aviation fuel, including jet fuel, aviation gasoline, and biofuel.

After two years in stealth mode, the Miami start-up says it can start deliveries in two years

Sea Cheetah To Reveal Hydrogen-powered Wing-in-ground-effect Vessel

AmyWilder

News about simulators and training procedures, as well as workforce.

IADA plans to present Q3 insights on October 21

IADA To Make its Mark at 2024 NBAA-BACE

Matt Thurber

News and issues relating to the aerospace industry that are related to the science, engineering and business of flight in space involving civil, industrial and military applications, and similar topics related to flight in the atmosphere of the Earth that are not covered more directly by other AINonline subject channels. In other words, both astronautical and aeronautical subjects, except for those aeronautical topics that are specifically covered elsewhere on this website.

More In Aircraft